ACCESSORY LOOMS

Sort By:
Show:
Display: List Grid
  • 61046 CAN TO OEM ADAPTER
    Plug-In ECU to CAN connector wiring loom 0.3 m These suit MoTeC PNP ECU's ..
    $80.00
  • 61198 CDL3 TO MX00 ADAPTER LOOM
    The CAN ECU To Display Loom is a terminated adaptor that joins the main loom provided with MoTeC Track and Race Kits to the standard MoTeC CAN • Used with MoTeC track and race kits and compatible with the communications connector. Connections can also be appropriate M400 M..
    $73.30
  • ACL AUTOSPORT USB EXTENSION CABLE
    PRICING TBD. This is a purpose built cable that cannot be substituted with an off-the-shelf alternative. Compatible storage devices:  ECONOMY 32GB USB 3.0 FLASH DRIVE PRO-LEVEL 32GB USB 3.0 AUTOSPOT DATA PLUG Compatible logging devices: ACL (USB) Built on demand - not kept in stock. ..
    $485.00
  • BTX BEACON TRANSMITTER POWER CABLE
    LOST YOUR POWER CORD FOR YOUR BTX, AND NEED ANOTHER ONE? HERE YOU GO! MADE FROM MIL-SPEC TEZFEL WIRE & RAYCHEM DR-25 HEATSHRINK. CABLE IS 6' LONG JUST LIKE THE ORIGINAL THAT CAME WITH THE BTX WHEN PURCHASED NEW. ..
    $77.50
  • C125 / C127 Terminated Harness
    The C125/C127 Harness is a cost-effective, plug-in display solution based on our new full color C125/C127 Display. This harness is a replacement for the one included in the dash track kits. The harness is expandable and can be adapted and expanded to suit various applications. The C1..
    $365.00
  • C125/C127 I/O Loom
    Wiring of sensors into the C125/C127 requires using either a custom loom or MoTeC's pre-wired C125 I/O Loom. This professional terminated loom adds 6 analogue voltage inputs and 2 analogue temperature inputs. ..
    $350.00
  • CABLE USB LOGGING AUTOSPORT 1.5M - PANEL MOUNT
    PRICING IS TBD This is a purpose built cable that cannot be substituted with an off-the-shelf alternative. Compatible storage devices:  ECONOMY 32GB USB 3.0 FLASH DRIVE PRO-LEVEL 32GB USB 3.0 AUTOSPOT DATA PLUG Compatible logging devices: C12X and C18X Display Loggers L120 (USB version)..
    $400.00
  • CDL3 / C125 / C127 / C1212 Curly Cord Harness
    Our plug-in curly cord allows the CDL3 / C125 / C127 / C1212 Track Kit buttons to be moved onto the steering wheel with ease. The loom is pre-terminated with a 6 pin DTM, and has 6 straight through wires, allowing for additional buttons if required. ..
    $102.00
  • CDL3 2 Button Harness
    2 Button Wiring harness for the CDL3 Track Kit that lets you plug 2 motorsport buttons directly into the CDL3 dash logger terminated harness. You can also use this to wire in the buttons into your existing harness. ..
    $102.00
  • CDL3 I/O Harness
    Wiring harness for the CDL3 Track Kit that lets you wire in sensors into the CDL3 dash logger. This is not included with the CDL3 Track Kit as not all customers use the I/O option that's included with the dash logger. ..
    $230.00
  • M ADL CAR-R
    9' CAR CABLE WITH 120 OHM RESISTOR ..
    $80.00
  • M1 Motorcycle PNP Dash CAN Extension
    Need a cable to connect your M1 PNP Bike kit to your new CDL3 or C125 display? This will plug right into the PNP harness, and you just need to cut to length for your application and terminate it into a dash connector and you are ready to go! Overall length of the cable is 10' *dash connector ..
    $59.96
  • M800 TO M130 HARNESS ADAPTER
    HAVE AN M800 INSTALLED ON YOUR VEHICLE AND WANT TO UPGRADE TO AN M130 WITHOUT HAVING TO REWIRE THE CAR? THIS IS WHAT YOU NEED! THIS WILL PLUG INTO AN M800 HARNESS, AND THE OTHER END INTO AN M130. FEATURES PROVISIONS FOR ETHERNET COMMS, LTC AND CAN. IT ALSO FEATURES SPARES FROM LEFT OVER PINS ON T..
    $650.00
  • NTK Extension Loom
    These are included in our R35 GTR kit, but work for any LTC-NTK or LTCD-NTK to extend the length of the sensor lead on your NTK sensor. They are approx 21.5" in length. Sold Each. ..
    $89.00
  • OBDII to CDL3/C125/C127 Cable
    Allows the user to read information from the vehicles OBDII port directly into the MoTeC Dash. This comes with a DTM-4S connector, and plugs into the accessory kit harness available for all three club level dashes. ..
    $45.00
  • OBDII to CDL3/C125/C127 Cable 90*
    Allows the user to read information from the vehicles OBDII port directly into the MoTeC Dash. This comes with a DTM-4S connector, and plugs into the accessory kit harness available for all three club level dashes. ..
    $45.00
  • USB DASH DOWNLOAD CABLE
    CABLE USB LOGGING 1.5M - PANEL MOUNT This is a purpose built cable that cannot be substituted with an off-the-shelf alternative. Compatible storage devices:  Economy 32GB Samsung USB 3.0 Flash Drive Mid-Level 32GB MoTeC USB Data Plug Compatible logging devices: C125 USB Display Loggers C..
    $56.50
  • C125 / C127 / C1212 Accessory Kit
    The C125/C127 Accessory Kit is a cost-effective, plug-in display solution based on our new full color C125/C127 Display. Offering professional level features at a club price, the kit is quick and easy to connect, requiring no previous experience with MoTeC systems. Each component simply plugs i..
    $500.00
  • CDL3 Accessory Kit
    CDL3 Track Logging Kit includes: SLM-C Club Shift Light Module 10 Hz GPS Two buttons, pre-wired Professional quality plug-in loom, terminated and labelled, with plug-in power adaptor  Ethernet Cable For those wishing to expand their CDL3 Track Logging Kit, an I/O upgra..
    $720.00